Filter
Product Voltage
Product Current
Showing 10–18 of 49 results
-
Cell Degassing Unit (CDU)
ADOR Digatron CDU, Cell Degassing Unit, is an automatic pouch cell degassing machine, designed for the production of lithium cells. The machine is designed to evacuate the gas from the cell, generated during the formation process.
-
CELL FILLING UNIT (CFU-EX)
ADOR Digatron CFU-EX, Cell Filling Unit, is an automatic pouch cell filling machine, designed to work externally from a dry room. The machine is designed to perform electrolyte dispensing and sealing of pouch cells under vacuum, in an oxygen free controlled environment.
-
Cell Filling Unit (CFU)
ADOR Digatron CFU, Cell Filling Unit, is an automatic pouch cell filling machine, designed for the production of lithium cells. The machine is designed to fill pouch type of cell and it performs high precision electrolyte dispensing and cell sealing under vacuum.
-
CYLINDRICAL CELL CARTRIDGE TRC 012-010
This cartridge is designed to connect up to 12 cylindrical cells to perform formation or test.
The contacting system is composed of spring-loaded pins for current flow, voltage control and an additional pin that optionally detects the temperature of the current collector. -
CYLINDRICAL CELL CARTRIDGE TRC 024-010
This cartridge is designed to connect up to 24 cylindrical cells to perform formation or test.
The contacting system is composed of spring-loaded pins for current flow, voltage control and an additional pin that can optionally detects the temperature of the current collector. -
DLS
Digatron’s fully integrable data loggers enable data acquisition for single cell voltages and battery and tank voltages during the test cycle. The sequentially recorded data can then be used for comparisons, assessments or as evidence.
-
DLT
Data logger for temperature with a measurement range from -100°C to +1372°C
-
EIS METER
Device for electrochemical impedance spectroscopy for assessing battery condition
-
Electrode Cutting Unit (ECU)
ADOR Digatron ECU, Electrode Cutting Unit, is an automatic electrode die cutting equipment designed to punch electrodes from coated aluminium and copper rolls. A roll of coated electrode is manually loaded on the machine and the web is automatically pulled under the die cutting station. A high-precision cutting die performs clean cut of the electrode according to the required dimension. Simultaneously, a pick and place system places the cut electrode into a storage tray.