Lithium Cell Production
ion batteries are expected to see broad use in applications ranging from off-the-shelf commercial goods to vehicles due to their low weight and high capacity. As a part of the global effort to wean society off carbon-based sources of energy, research is expanding to boost capacity and extend service life for use in electric vehicles. Ador digatron offers a wide range of quality testing equipment for lithium-ion cells & pack.
-
Ageing Unit (AVU)
ADOR Digatron AVU, Cell Ageing Unit, is an automatic pouch cell ageing equipment, designed for the production of lithium cells. The machine is designed to store lithium cells at controlled temperature.
-
AXIAL TAB POUCH CELL CARTRIDGE TRP 024-010
This cartridge is designed to connect up to 24 pouch cells, with both tabs located on the same side of the cell, to perform formation or test.
-
Cell Degassing Unit (CDU)
ADOR Digatron CDU, Cell Degassing Unit, is an automatic pouch cell degassing machine, designed for the production of lithium cells. The machine is designed to evacuate the gas from the cell, generated during the formation process.
-
CELL FILLING UNIT (CFU-EX)
ADOR Digatron CFU-EX, Cell Filling Unit, is an automatic pouch cell filling machine, designed to work externally from a dry room. The machine is designed to perform electrolyte dispensing and sealing of pouch cells under vacuum, in an oxygen free controlled environment.
-
Cell Filling Unit (CFU)
ADOR Digatron CFU, Cell Filling Unit, is an automatic pouch cell filling machine, designed for the production of lithium cells. The machine is designed to fill pouch type of cell and it performs high precision electrolyte dispensing and cell sealing under vacuum.
-
CYLINDRICAL CELL CARTRIDGE TRC 012-010
This cartridge is designed to connect up to 12 cylindrical cells to perform formation or test.
The contacting system is composed of spring-loaded pins for current flow, voltage control and an additional pin that optionally detects the temperature of the current collector. -
CYLINDRICAL CELL CARTRIDGE TRC 024-010
This cartridge is designed to connect up to 24 cylindrical cells to perform formation or test.
The contacting system is composed of spring-loaded pins for current flow, voltage control and an additional pin that can optionally detects the temperature of the current collector. -
Electrode Cutting Unit (ECU)
ADOR Digatron ECU, Electrode Cutting Unit, is an automatic electrode die cutting equipment designed to punch electrodes from coated aluminium and copper rolls. A roll of coated electrode is manually loaded on the machine and the web is automatically pulled under the die cutting station. A high-precision cutting die performs clean cut of the electrode according to the required dimension. Simultaneously, a pick and place system places the cut electrode into a storage tray.
-
OPPOSITE TAB POUCH CELL CARTRIDGE TRP 024-011
This cartridge is designed to connect up to 24 pouch cells, with tabs located on the opposite sides of the cell, to perform formation or test.
-
Pouch Forming Unit (PFU)
ADOR Digatron PFU, Pouch Forming Unit, is an automatic blister pouch forming machine, designed for the production of lithium cells. Pouch film unwinding, forming and cutting into single blisters are performed automatically.
-
Pouch Sealing Unit (PSU)
ADOR Digatron PSU, Pouch Sealing Unit, is an automatic pouch cell heat-sealing machine designed for the production of lithium cells. The machine is designed to heat-seal the cell on three sides, leaving the gas pouch side open for the next filling step.
-
Sheet Stacking Unit (SSU)
ADOR Digatron SSU, Sheet Stacking Unit, is an automatic cell stacking machine, designed for the production of lithium cells. The operator manually loads the machine with one anode tray and one cathode tray and starts the automatic cycle.
-
Tab Welding Unit (TWU)
ADOR Digatron TWU, Tab Welding Unit, is an automatic electrode tab ultrasonic welding machine, designed for the production of lithium cells. It is designed to trim the current collectors of the electrodes, weld them together and connect them to the cell tabs using an ultrasonic welding system.
-
Z-Fold Stacking Unit (ZSU)
ADOR Digatron ZSU, Z-Fold Stacking Unit, is an automatic electrode stacking and separator folding machine, designed for the production of lithium cells. The operator manually loads the machine with anode and cathode electrodes, stored in specifically designed trays that bring them to the exact pick up position and starts the automatic cycle.