SINGLE STATION MACHINES FOR
LITHIUM CELL PRODUCTION
Single station process machines for lithium pouch cells production. A kit of machines to build lithium ion pouch cells,
from electrode cutting and cell stacking toward final cell filling and degassing.
DRY ROOM
-
CELL FILLING UNIT (CFU-EX)
ADOR Digatron CFU-EX, Cell Filling Unit, is an automatic pouch cell filling machine, designed to work externally from a dry room. The machine is designed to perform electrolyte dispensing and sealing of pouch cells under vacuum, in an oxygen free controlled environment.
-
Cell Filling Unit (CFU)
ADOR Digatron CFU, Cell Filling Unit, is an automatic pouch cell filling machine, designed for the production of lithium cells. The machine is designed to fill pouch type of cell and it performs high precision electrolyte dispensing and cell sealing under vacuum.
-
Electrode Cutting Unit (ECU)
ADOR Digatron ECU, Electrode Cutting Unit, is an automatic electrode die cutting equipment designed to punch electrodes from coated aluminium and copper rolls. A roll of coated electrode is manually loaded on the machine and the web is automatically pulled under the die cutting station. A high-precision cutting die performs clean cut of the electrode according to the required dimension. Simultaneously, a pick and place system places the cut electrode into a storage tray.
-
Pouch Forming Unit (PFU)
ADOR Digatron PFU, Pouch Forming Unit, is an automatic blister pouch forming machine, designed for the production of lithium cells. Pouch film unwinding, forming and cutting into single blisters are performed automatically.
-
Pouch Sealing Unit (PSU)
ADOR Digatron PSU, Pouch Sealing Unit, is an automatic pouch cell heat-sealing machine designed for the production of lithium cells. The machine is designed to heat-seal the cell on three sides, leaving the gas pouch side open for the next filling step.
-
Sheet Stacking Unit (SSU)
ADOR Digatron SSU, Sheet Stacking Unit, is an automatic cell stacking machine, designed for the production of lithium cells. The operator manually loads the machine with one anode tray and one cathode tray and starts the automatic cycle.
-
Tab Welding Unit (TWU)
ADOR Digatron TWU, Tab Welding Unit, is an automatic electrode tab ultrasonic welding machine, designed for the production of lithium cells. It is designed to trim the current collectors of the electrodes, weld them together and connect them to the cell tabs using an ultrasonic welding system.
-
Z-Fold Stacking Unit (ZSU)
ADOR Digatron ZSU, Z-Fold Stacking Unit, is an automatic electrode stacking and separator folding machine, designed for the production of lithium cells. The operator manually loads the machine with anode and cathode electrodes, stored in specifically designed trays that bring them to the exact pick up position and starts the automatic cycle.
CLEAN ROOM
-
Ageing Unit (AVU)
ADOR Digatron AVU, Cell Ageing Unit, is an automatic pouch cell ageing equipment, designed for the production of lithium cells. The machine is designed to store lithium cells at controlled temperature.
-
AXIAL TAB POUCH CELL CARTRIDGE TRP 024-010
This cartridge is designed to connect up to 24 pouch cells, with both tabs located on the same side of the cell, to perform formation or test.
-
Cell Degassing Unit (CDU)
ADOR Digatron CDU, Cell Degassing Unit, is an automatic pouch cell degassing machine, designed for the production of lithium cells. The machine is designed to evacuate the gas from the cell, generated during the formation process.
-
CYLINDRICAL CELL CARTRIDGE TRC 012-010
This cartridge is designed to connect up to 12 cylindrical cells to perform formation or test.
The contacting system is composed of spring-loaded pins for current flow, voltage control and an additional pin that optionally detects the temperature of the current collector. -
CYLINDRICAL CELL CARTRIDGE TRC 024-010
This cartridge is designed to connect up to 24 cylindrical cells to perform formation or test.
The contacting system is composed of spring-loaded pins for current flow, voltage control and an additional pin that can optionally detects the temperature of the current collector. -
Lab Formation Unit (LFU)
ADOR Digatron LFU, Lab Formation Unit, is an automatic pouch cell formation equipment , designed for the production of lithium cells.
-
OPPOSITE TAB POUCH CELL CARTRIDGE TRP 024-011
This cartridge is designed to connect up to 24 pouch cells, with tabs located on the opposite sides of the cell, to perform formation or test.
Accessories
-
BPK
Pole clamps and lever handle for currents of up to 100 amps
-
Waterbath
Water bath for temperature equalization during test phases
-
Vibrating Table
Stable vibrating table to simulate vibration testing according to EN 50342
-
Temperature Climatic Chamber
Climatic cabinet for controlling the temperature of the battery to be tested from -70°C to 180°C
-
Temperature Cimatic Cabinet
With the climatic cabinet, you can easily cool or heat any battery type to carry out specific temperature tests.
-
Safetybox
Redundant monitoring unit for defined limit values to reduce damage on the DUT
-
EIS METER
Device for electrochemical impedance spectroscopy for assessing battery condition
-
DLT
Data logger for temperature with a measurement range from -100°C to +1372°C
-
DLS
Digatron’s fully integrable data loggers enable data acquisition for single cell voltages and battery and tank voltages during the test cycle. The sequentially recorded data can then be used for comparisons, assessments or as evidence.
-
Battery Cable
Custom cable for connecting the test object to the Digatron device
DIGATRON BRANCHES
MILANO, ITALY
Via Vincenzo Monti, 4
20123, Milano
Italy
39-02-565-698-44
info@digatronsystems.com
AACHEN, GERMANY
Tempelhofer Str. 12-14
52068, Aachen
Germany
+49-241-168-090
+49-241-168-0919
info@digatron.de
SHELTON, (CT), USA
50 Waterview Drive
Shelton, CT 06484
United States of America
+1-203-446-8000
+1-203-446-8015
info@digatron.com
QINGDAO, CHINA
#33 Xianshan Dong Road
Chengyang District Qingdao
266108 PR. China
+86-532-8608 9988
+86-532-8608 9909
info@digatron.com.cn
PUNE, INDIA
Ador Warrior City Campus,
Plot No. 51, D-2 Block,
Ramnagar, MIDC-Chinchwad.
Pune-411019, India
+91-20-40737300
+91-20-27475817
cmo@adordigatron.com